2 LB TotalMass 4' x 15'

Click main image to zoom & pan

Availability: In stock

Price Per Roll

List Price: $163.00

Sale Price: $130.00

Or Add to Wishlist

Qty:

Quick
Product
Facts

This product is 4' wide, 15' long, and 1/4" thick.
This material weighs 2 LB per square foot.
Stand alone STC rating is 31.
UL rated for vertical installation in wall assemblies.
Basic mass loaded vinyl roll with the same performance as any name brand MLV product. Don't be fooled by the rolls that cost twice as much, it is all the same.
Can be installed pretty much anywhere. In walls, ceilings, floors, around duct work, on exterior fences, in curtains, in vehicles, and more.
Low VOC with almost no odor at all. Smell fully dissipates within a couple hours of install.
Made entirely in the USA.

Estimating
For This
Product

For Walls

Measure the length of the wall and round up to the nearest foot divisible by four (i.e. a 10'6" wall would round up to 12'). This number will be represented as 'A'.
Measure the height of the wall from floor to ceiling. Round up to the nearest foot (i.e. 7'9" would be 8'). This number will be represented as 'B'
Multiply A x B. The result is 'C'. This is the total square feet of TotalMass Barrier required to cover your wall.
Divide C by the width of the roll you are purchasing (either 4' or 4.5'). This final number is the total linear feet required to cover your wall.

For Ceilings and Floors

Measure the width of the floor or ceiling and round up to the nearest foot divisible by four (i.e. a 10'6" wall would round up to 12'). This number will be represented as 'A'.
Measure the length of the floor or ceiling. Round up to the nearest foot (i.e. 7'9" would be 8'). This number will be represented as 'B'.
Multiply A x B. The result is 'C'. This is the total square feet of TotalMass Barrier required to cover your floor or ceiling.
Divide C by the width of the roll you are purchasing (either 4' or 4.5'). This final number is the total linear feet required to cover your floor or ceiling.

Product
Shipping
Info

Flat rate shipping based on the number of rolls ordered.
Cheap LTL freight available on large orders.
Same day shipping if ordered by 12 PM ET for east coast customers or 3 PM MT for west coast customers.
Delivery within 1-5 days to all customers.
Ships from our Utah or Massachusetts location. Pickup orders must be placed over the phone before picking up.

Our quick shipping and strategic locations allow for this product to be delivered within 2 days or less to over 97% of the US population.
Map of estimated transit times:

Description
Estimating
Sound Tests
Installation
Product Specs

2 LB TotalMass Barrier is a 1/4th inch thick material that is black in color. Mass loaded vinyl, or acoustic barrier, was one of the first real innovations in the sound isolation market. Unlike other sound isolation products, TotalMass Barrier can provide instant mass with damping to any location. In walls, ceilings, floors, on machinery, household appliances, around pipes, exterior fences, doors, as curtains to divide a room or over a window, and really anywhere.

2 LB per square foot TotalMass Barrier on its own has an STC rating of 31. That means our 1/4" TotalMass Barrier material can perform as well as a 2" x 4" wall with 5/8" drywall on each side of the wall. Materials that are adequate for isolation in floors need to be thick and our 2 LB TotalMass Barrier meets that requirement. However, MLV is not known for as a strong performer in low frequencies compared to a resilient sound clip system or a wall with Green Glue applied. But given other advantages of MLV it should still be in consideration for your sound isolation project. Also, please consider the overall product and shipping price when comparing our price for mass loaded vinyl to our competitors.

For Walls

If you are planning to install our TotalMass Barrier vertically in a wall, then follow these steps for estimating how much you need:

Measure the length of the wall and round up to the nearest foot divisible by four (i.e. a 10'6" wall would round up to 12'). This number will be represented as 'A'.
Measure the height of the wall from floor to ceiling. Round up to the nearest foot (i.e. 7'9" would be 8'). This number will be represented as 'B'
Multiply A x B. The result is 'C'. This is the total square feet of TotalMass Barrier required to cover your wall.
Divide C by the width of the roll you are purchasing (either 4' or 4.5'). This final number is the total linear feet required to cover your wall.

For Ceilings and Floors

If you are planning to install our TotalMass Barrier on your floor or ceiling, then follow these steps for estimating how much you need:

Measure the width of the floor or ceiling and round up to the nearest foot divisible by four (i.e. a 10'6" wall would round up to 12'). This number will be represented as 'A'.
Measure the length of the floor or ceiling. Round up to the nearest foot (i.e. 7'9" would be 8'). This number will be represented as 'B'.
Multiply A x B. The result is 'C'. This is the total square feet of TotalMass Barrier required to cover your floor or ceiling.
Divide C by the width of the roll you are purchasing (either 4' or 4.5'). This final number is the total linear feet required to cover your floor or ceiling.


.PDF Sound Test	Estimated Results

View our in-depth installation guide for TotalMass Barrier

~524 KB Printable TotalMass Install Guide

Installation of TotalMass Barrier is simple whether you are installing in walls, ceilings, or floors. The installation guide linked to above will provide you with detailed instructions for installing TotalMass in walls and ceilings.

For floor installation, TotalMass Barrier can be installed in either a floating fashion or with minimal attachment using standard drywall nails. You should cover the entire floor with the TotalMass and keep your seams tight. From there the seams should be taped to keep the TotalMass Barrier from shifting. The tape required for this is standard vinyl duct tape. Any gaps or tears in the barrier should be taped and sometimes even caulked with an acoustical caulk.

Weight:	2 pounds per square foot
Tensile Strength:	500psi
Tear Strength:	100 pounds
Thickness:	1/4"
Ultimate Elongation:	90%
Shore A Durometer:	85 +/-
Temperature Range:	-20F to 180F
Burn Tests:	Self Extinguishing, UL94-HF-1 Pass
Waterproof:	100%
Misc:	MLV will not shrink, rot, or cause erosion and has a strong resistance to adverse environmental conditions.

~51 KB TotalMass 2 LB Product Specs

Quick Delivery To All Of Our Customers

Same day shipping if ordered by noon ET for east coast customers or 3 PM MT for west coast customers.

Our quick shipping and strategic locations allow for this product to be delivered within 2 days or less to over 97% of the US population. Next day delivery available to the highlighted areas below.